Спасибо!

Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools


Technical Specifications

Parameters Value
Measurement range, mm 0…700, 1000, 1500, 2000, 2500, 3000
Limit of the allowed basic level measurement error, % ± 0,5 (when working with fuel for which the calibration was carried out or after filling the tank to the full when changing the type of fuel)
Output interface for measured values RS-485
Accelerometer
Programmable interface transmission rate, bit/s 1200, 2400, 4800, 7200, 9600, 14 400, 19 200, 38 400, 57 600, 115 200
Measured values output protocol (protocol auto-detection) LLS, Modbus
Power supply voltage, V 7 – 75
Power consumption, W 0,4
Current consumption, mA 40
Electric strength of galvanic isolation, not less than, V 2500
Working temperature range, °С From -40 to +80
Relative humidity at 25 °C (without moisture condensation), % From 5 to 95
Atmospheric pressure, kPa From 84 to 107
Maximum relative humidity at 25 °С (without moisture condensation), % 100
Ingress protection rating IP69k
Operating mode Continuous
Internal filter size From 0 to 30
Measurement time period, s 1
Digital reading range corresponding to the maximum value of the measured level 1…4095
Digital reading range corresponding to the minimum value of the measured level 0…4094
Temperature measuring range, °C From -40 to +80
Overall dimensions, mm 87.3 x 83.5 x (21 + length of the measuring probe)
Sensor cable length: cm 50
Installation cable length: cm 700
Weight, kg Not more than 2
Average service life, years 8