In the “CAN data “ section:

In the “Calculation method” field select the parameter, based on which Omnicomm Online software will register the CAN parameter.

CAN parameters and possible calculation methods:

• CAN SPN38 parameter. The terminal transmits the fuel level in tank 2, SPN38 signal

• CAN SPN70 parameter. The terminal transmits the parking brake status from the CAN-bus, SPN70 signal

• CAN SPN91 parameter. The terminal transmits the accelerator pedal position from the CAN-bus, SPN91 signal

• CAN SPN92 parameter. The terminal transmits the engine load status from the CAN-bus, SPN92 signal

• CAN SPN96 parameter. The terminal transmits the fuel level in tank 2, SPN96 signal

• CAN SPN100 parameter. The terminal transmits the engine oil pressure value from the CAN-bus, SPN100 signal

• CAN SPN110 parameter. The terminal transmits the coolant temperature value from the CAN-bus, SPN110 signal

• CAN SPN174 parameter. The terminal transmits the fuel temperature value from the CAN-bus, SPN174 signal

• CAN SPN175 parameter. The terminal transmits the engine oil temperature value from the CAN-bus, SPN175 signal

• CAN SPN182 parameter. The terminal transmits the daily fuel consumption value from the CAN-bus, SPN182 signal

• CAN SPN184 parameter. The terminal transmits the instantaneous economy event from the CAN-bus, signal SPN184

• CAN SPN190 parameter. The terminal transmits the engine speed value from the CAN-bus, SPN190 signal

• CAN SPN244 parameter. The terminal transmits the daily mileage value from the CAN-bus, SPN244 signal.

• CAN SPN245 parameter. The terminal transmits the total mileage value from the CAN-bus, SPN245 signal

• CAN SPN247 parameter. The terminal transmits the value of the total running time of the motor from the CAN-bus, SPN247 signal.

• CAN SPN250 parameter. The terminal transmits the value of the total fuel consumption for the entire time of operation of the vehicle engine from the CAN-bus, SPN250 signal

• CAN SPN521 parameter. The terminal transmits the service brake pedal position information from the CAN-bus, SPN521 signal

• CAN SPN522 parameter. The terminal transmits clutch pedal position information from the CAN-bus, SPN522 signal

• CAN SPN527 parameter. The terminal transmits the cruise control status from the CAN-bus, SPN527 signal

• CAN SPN597 parameter. The terminal transmits the normal brake pedal status information from the CAN-bus, SPN597 signal.

• CAN SPN598 parameter. The terminal transmits the clutch pedal status information from the CAN-bus, SPN598 signal

• CAN SPN914 parameter. The terminal transmits the remaining mileage to the next maintenance from the CAN-bus, SPN914 signal.

• CAN SPN916 parameter. The terminal transmits the remaining number of engine hours until the next maintenance from the CAN-bus, SPN916 signal.

• CAN SPN917 parameter. The terminal transmits the total mileage data from the CAN-bus, SPN916 signal

• CAN SPN1624 parameter. The terminal transmits the value of the instantaneous speed of a vehicle from the CAN-bus, SPN1624 signal

• CAN SPN1821 parameter. The terminal transmits information about the status of a vehicle doors from the CAN-bus, SPN1821 signal

• CAN SPN1856 parameter. The terminal transmits information about the status of vehicle seat belts from the CAN-bus, SPN1856 signal

• CAN SPN5054 parameter. The terminal transmits the total fuel consumption from the CAN-bus, SPN1856 signal

For each of the given CAN parameters, it is possible to set the calculation method in the form of data received via MODBUS protocol or custom CAN parameters.