In the section “Main parameters”:
VH name — VH name indicated while adding the VH in the control server.
Terminal type — type of the terminal installed on the VH.
Unique ID — IMEI or factory number of the terminal indicated when adding the VH in the control server. Allowable characters are Latin letters and digits.
ID Omnicomm — identification number of the terminal installed on the VH. The identification number is formed automatically based on the unique ID terminal.
Telephone number — telephone number of the SIM-card installed in the terminal. Data collection timer, sec. The parameter is required to ensure regular time intervals between the events (data) in Omnicomm Online software. Recommended value – interval of collection data from fuel level sensors LLS installed in the terminal.
Maximum speed limit, kph — enter the value of VH speed, in excess of which Omnicomm Online software will record the VH motion with the excess speed.
Engine critical RPM — enter the value of engine speed in excess of which Omnicomm Online software will record VH operation under the limit load.
Engine idling RPM — engine speed value in excess of which Omnicomm Online software will record the VH motion.