Technical Specifications
| Parameters | Value |
|---|---|
| Measurement range, mm | 0…700, 1000, 1500, 2000, 2500, 3000 |
| REF-channel length, mm | - for sensors of 700, 1000 mm length - 200 - for sensors longer than 1500 mm - 700 |
| Limit of the allowed basic level measurement error, % | ± 0,5 (when working with fuel for which the calibration was carried out or after filling the tank to the full when changing the type of fuel) |
| Output interface for measured values | RS-232, RS-485 |
| Programmable interface transmission rate, bit/s | 1200, 2400, 4800, 7200, 9600, 14 400, 19 200, 38 400, 57 600, 115 200 |
| Measured values output protocol (protocol auto-detection) | LLS, Modbus |
| Power supply voltage, V | 7 – 75 |
| Power consumption, W | 0,4 |
| Current consumption, mA | 40 |
| Electric strength of galvanic isolation, not less than, V | 1500 |
| Working temperature range, °С | From -40 to +80 |
| Relative humidity at 25 °C (without moisture condensation), % | From 5 to 95 |
| Atmospheric pressure, kPa | From 84 to 107 |
| Maximum relative humidity at 25 °С (without moisture condensation), % | 100 |
| Ingress protection rating | IP69k |
| Operating mode | Continuous |
| Internal filter size | From 0 to 30 |
| Measurement time period, s | 1 |
| Overall dimensions, mm | 87.3 x 83.5 x (21 + length of the measuring probe) |
| Weight, kg | Not more than 2 |
| Average service life, years | 8 |
| Digital reading range corresponding to the maximum value of the measured level | 1…4095 |
| Digital reading range corresponding to the minimum value of the measured level | 0…1023 |
| Temperature measuring range, °C | From -40 to +80 |
| Absolute temperature measurement error throughout the whole range of working temperature, °C | ± 5 |
