Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools

Engine RPM

In the “Settings” tab select the “Inputs” section from the list.

In the “Engine RPM” section:

Omnicomm Configurator Remote configuration server

“Data source” – select the signal type. Possible values:

  • “Disabled”
  • “Ignition key“
  • “CAN bus”
  • “RPM input”

Connect the tachometer to the Smart and Light Terminals according to the diagram:

Connetion to tachometer

The place of connection to the tachometer shall be the point in the vehicle electric network, in which the pulse signal frequency is proportional to the engine RPM.