Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools

Selection of Ignition Source

In the “Settings” tab select the “Inputs” section from the list.

In the “Ignition key status” section: Selection of data source to fix ignition “Data source” – select the data to register ignition on/off.

Possible options:

“Ignition key” – the ignition on/off is registered on the position of the key upon direct connection to the ignition key.

“Onboard voltage” – the ignition on is registered upon reaching the vehicle network power supply threshold voltage. Specify the value “Threshold voltage, V” – the value of the vehicle network power supply voltage, upon reaching which the ignition on will be registered. Ignition off is registered, when the voltage drops to 0.5 V below the threshold.