Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools

Driver Identification

When the Omnicomm ICON display is connected to a terminal, the driver identification is implemented using a MIFARE Ultralight card. For ease of identification, an RFID card holder is provided.

To provide the driver identification, enable this option in the terminal settings and specify the list of authorized cards.

After the Omnicomm ICON display is turned on, apply an RFID card:

Authorization request

If the RFID card is not listed among the authorized cards, the message “Access denied” will appear.

To provide identification in a continuous readout mode, use an RFID card holder.