Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools

Setting Password on Configuration Changing

In the “Settings” tab select the “Additional equipment” section from the list.

In the “Configuring a password” section:

Omnicomm Configurator Remote configuration server

If you need to use a password to configure the terminal settings, in the field “Ask for password when saving settings” select “Enabled”. Press the “Change password” button. A window will open:

Change password

“New password” and “Confirm new password” – enter a new password that will be used to get access to settings configuration. The password shall contain 8 characters maximum.

Press the “Save” button.

“Confirm password” – repeat the entered password. Press the “Record into device” button.