“IP address or domain name CS 1” — enter the IP address or the domain name of the communication server (CS) with which the terminal (Figure 7) is operating. *for Omnicomm clients — enter the domain name of the communication server cs.dc1.omnicomm.ru. “Port” — enter the port that the terminal will be using to connect to the communication server. *for Omnicomm clients — enter port 9977. “Protocol” — select data transfer protocol to transfer data to the communication server. Possible options: Omnicomm or EGTS. If it is required to transfer data to the second communication server, fill in the connection settings to communication server 2.