SUMMARY
The user manual describes how to change terminal configurations remotely.
1.1 TERMS AND DEFINITIONS
OS — operating system;
PC– personal computer;
SW — software;
VH — transportation vehicle;
CAN (Controller Area Network — controller network) — standard of an industrial network mainly designed to unite various execution units and sensors in one network;
EGTS –EGTS protocol (Era Glonass Telematics Standard);
iButton — set of devices designed to identify the driver;
IMEI — (International Mobile Equipment Identity) — international identifier of mobile equipment;
GPS — (Global Positioning System) — satellite-based navigation system;
GPRS — (General Packet Radio Service — public packet radio service) — customization of mobile communi- cation technology GSM performing packet data transmission;
GSM — (Global System for Mobile Communications) — global digital standard for mobile cellular communi- cation;
PGN (Parameter Group Number) — parameter group number determining the content of the respective mes- sage according to SAE J1939;
SIM 1 — SIM-card installed in the slot on the external side of the terminal;
SIM 2 — for Omnicomm Optim 2.0 terminals — a SIM-card installed in the slot inside the terminal, i.e. during the case opening, or for Profi 2.0 — a SIM-chip;
SPN — parameter code according to SAE J1939.
| Workstation | Hardware | Software |
|---|---|---|
| User | Personal computer with internet access | OS Windows XP or Windows Vista, Linux. Browsers (versions of at least) Mozilla 2.Х, Opera 9. |
1.3 USER QUALIFICATION REQUIREMENTS Advanced user
