For interfaces EIA-485 and RS-232, select the function: • “Off” — interface is not in use; • “CAN-log” — connection to CAN-log; • “J1708” — connection to information bus J1708 of the transportation vehicle; • “NMEA reception” — use of navigation data from the external device; • “NMEA transmission” — use of navigation data of the terminal in the external device; • “PP-01” — use to connect up a passenger traffic sensor; • “JPEG camera” — use to connect up a digital camera; • “DV-01” — use to connect up a driver’s display; • “LLS” — use to connect up LLS fuel level sensors; “Tyre pressure sensor” (only for interface RS-232) — use to connect a tyre pressure sensor “RS port speed for NMEA data” — select the speed of the port to receive navigation data from the external device.