Мы исправим ошибку в ближайшее время

Сообщить об ошибке

Site Tools

Selection of Speed Source

In the “Settings” tab select the “Inputs” section from the list.

In the “Vehicle speed” section:

Omnicomm Configurator Remote configurator service

“Data source” – select the data to process the speed values. Possible options: “GPS”, “CAN bus” or “UI6” (for Omnicomm Profi, Profi Wi-Fi).

Connection to universal input No.6 of the Terminal Omnicomm Profi, Profi Wi-Fi is performed depending on the type of speed sensor.

Connection to pulse speed sensor is made according to the diagram: Connection to pulse speed sensor