Refrigerator Operation
- Select a VH
- Press the button “Add report” and select “Refrigerator Operation”
In the program window will display the report on operation of the current refrigerator state.
The report contains the following information:
- iQFreeze name – iQFreeze name in the Bluetooth network
- Serial number – iQFreeze serial number
- Firmware version – iQFreeze firmware version
- Connection with CHU – availability of connection with cooling and heating unit. Possible options: “No connection”, “Connection available”
- Data actuality – the date and time of raw data received from iQFreeze
- Installation type – CHU type. Possible options: ThermoKing SLX, Carrier Supra/Maxima, Zanotti, ThermalMaster 5100/8100, Carrier Vector 1850
- System serial number – CHU serial number
- Number of errors – number of CHU errors
- CHU temperature – actual temperature in the CHU section. Possible values: from -128.00 to +128.00
- Set temperature – set-point temperature in the CHU section. Possible values: from -128.00 to +128.00
- CHU temperature section 2 (3) – actual temperature in section 2 (3). Possible values: from -128.00 to +128.00
- Set-point temperature section 2 (3) – set-point temperature in section 2 (3). Possible values: from -128.00 to +128.00
- Door status – status of the CHU door. Possible options: open, closed
- Coolant temperature – CHU coolant temperature. Possible values: from -128.00 to +128.00
- Engine RPM – status of the CHU engine RPM. Possible options: stop, low, high
- Compressor configuration – configuration of the CHU compressor. Possible options: Start/Stop, Continuous
- System status – CHU system status. Possible options: stop, heating, cooling, defrosting
- Battery voltage – CHU battery voltage. Possible values: from 0.00 to +99.00
- Ambient air temperature – CHU ambient air temperature. Possible values: from -128.00 to +128.00
- Engine hours – Engine hours of CHU from the engine. Possible values: from 0.00 to 1000000.00
